micnode touch - Paging station

The micnode touch device went through a significant technological upgrade and we are proud to announce our  new micnode2  microphone station:   Micnode Touch Paging Station is a  microphone console with a built-in to...

Two product variations are available for the Micnode Touch Paging Station: MTH      Micnode Touch Paging Station with a handheld microphone, MTG      Micnode Touch Paging Station with a gooseneck.

Two product variations are available for the Micnode Touch Paging Station: MTH      Micnode Touch Paging Station with a handheld microphone, MTG      Micnode Touch Paging Station with a gooseneck.

The device settings can be accessed in two ways. Locally on the microphone station by clicking on the top left menu icon. Remotely by accessing the configuration web page accessible from your web browser on https://

The Micnode Touch Paging station is connected to the network via a standard ethernet cable. This network consists of: Q-Sys Core Windows-based computer for Q-Sys designer network setup, not required for runtime operation, Gigabit Ethernet Switch...

Configure an external application on your Micnode Touch Paging station. Insert the URL to the app that is to be displayed on the paging station screen as UI. Confirm the URL by tapping the ‘Save’ button. To switch to the new application immediately ...

You can create your own UCI (User Control Interface) in QSC and use this UCI for your paging station as User interface.  First create the UCI in Q-sys designer. Next you will need the URL of this UCI, which you can insert in the paging station...

Once the network settings and configuration in Q-Sys are completed, the areas where a message can be played  are available for selection and message playing can be triggered.

To update the firmware you need to access the configuration page remotely through a web browser. The system update files are uploaded with the ‘Select file’ button. Firmware file is selected from local station.  File type:     Ca...

For wall-mounting of the paging station, prepare the respective place on the wall and the necessary cabling. The openings for screws on the mounting bracket are at a distance of 950 x 950 mm from each other.   Important:  The cutout ...

The Micnode Touch Paging Station base attaches to the device with two screws. Before attaching the device to the stand, connect all of the cables on the paging station rear panel, and put the cables through the stand.  

Technical Specifications Contact