micnode2h - Handheld Microphone Station

micnode2 microphone station is a  paging station with a built-in 8-inch touch screen and customizable user interface for advanced applications. It is delivered with a handheld microphone. The device is wall-mounted or can optionally be placed ...

Description Front and rear panel of the micnode2 microphone station. 

Description In the previous chapter you connected your micnode2 microphone station to the network via a standard ethernet cable. To add  your new device tothe Q-SYS audio network, it should consist of: Q-SYS Core  and further Q-SYS p...

Description Create an AES67 stream in the Q-SYS designer. Select first the component and then configure it in the micnode2 plugin. Add the stream component to your Q-SYS design:  Set up stream properties : IMPORTANT : Streams need ...

Description Micnode2 device recovery from USB provided by nnounce support team.  Note : Not all USB flash discs versions are compatible, use version 3.1. Insert USB stick to the USB port on the rear panel. Power on/off of the device...

Description Firmware update of your micnode2 device is available in the Maintenance section. The installation file is provided by the nnounce support team. NOTE : The file is typically a .swu file.

Description For wall-mounting of the microphone station, prepare the respective place on the wall and the necessary cabling. The openings for screws on the mounting bracket are at a distance of 950 x 950 mm from each other.   IMPORTANT...

Description The micnode2 microphone station can be attached to the  desktop-stand which is available as an accessory . Before attaching the device to the stand, connect all of the cables on the microphone station rear panel, and put the cabl...

Description Replace the microphone on your micnode2 microphone station. The micnode2 device is ready to use with the new microphone.

Technical Specifications Dimensions Microphone cabel length: min. 80 cm (31.5 “), can be stretched to a length of up to 110 cm Contact