micnode2g - Gooseneck Microphone Station
- 2 Sub categories
- 7 Articles
- Updated on May 15, 2025
- Published on Aug 5, 2024
micnode2 gooseneck microphone station is a paging station with a built-in 8-inch touch screen and customizable user interface for advanced applications. It is delivered with a gooseneck microphone. The device is placedon a desk. It is built on top...
- Updated on Jan 26, 2026
- Published on Aug 5, 2024
Description Front and rear panel of the micnode2 microphone station.
- 2 Articles
- Updated on Sep 18, 2026
- Published on Aug 5, 2024
Description In the previous chapter you connected your micnode2 microphone station to the network via a standard ethernet cable. To add your new device tothe Q-SYS audio network, it should consist of: Q-SYS Core and further Q-SYS peri...
- Updated on Sep 18, 2026
- Published on May 24, 2024
Description Create an AES67 stream in the Q-SYS Designer. Select first the component and then configure it in the micnode2 plugin. Add the stream component to your Q-SYS Design: Set up stream properties : IMPORTA...
- 3 Articles
- Updated on May 15, 2025
- Published on Aug 5, 2024
Description The micnode2 device can be operated with Q-SYS by the following ways: Using the built-in paging dashboard, Using an external application webpage or Using Q-SYS UCI. NOTE : The user interface mode needs to be co...
- Published on May 24, 2024
Description Micnode2 device recovery from USB provided by nnounce support team. Note : Not all USB flash discs versions are compatible, use version 3.1. Insert USB stick to the USB port on the rear panel. Power on/off of the device...
- Updated on May 15, 2025
- Published on May 24, 2024
Description Firmware update of your micnode2 device is available in the Maintenance section. The installation file is provided by the nnounce support team. NOTE : The file is typically a .swu file.
- Updated on Sep 18, 2026
- Published on Aug 5, 2024
Technical Specifications Dimensions Contact