nnounce
- Simpleway
- nnounce

INSTALLATION GUIDE
micnode2 micnodeAUX ionode4
Release notes
Release 1.3

nnounce HARDWARE GUIDE

ampnode4 - Amplifier

6 Articles in this category

Print
Share

ampnode4 - Amplifier

6 Articles in this category

Share

General information

The ampnode4 is a compact half-rack size amplifier with a power sharing feature and 600W total output power. The device has convenient installation options and can be rack-mounted individually, in pairs, or used as a stand-alone unit. Ampnode...

Updated on : 28 Jun 2024

Features

Description Front and rear panel descprition of control leds, ports and connectors. Product sticker on device bottom contains MAC address required for device pairing. Control LEDs Front panel and rear panel LEDs are aligned, the desc...

Updated on : 29 May 2024

Device Configuration and Setup

First connect your device to the power supply using a suitable power connector. In a second step, connect the device to your network with a LAN cable and then establish the network connection. Access the nnounce configuration UI to define the LAN se...

Updated on : 29 May 2024

Q-SYS Ecosystem Integration

Description In the previous chapter you connected your ampnode4 amplifer to the network via a standard ethernet cable. To add your new device to the Q-SYS audio network, it should consist of: Q-SYS Core + Q-SYS peripherals, Windows-based compu...

Updated on : 29 May 2024

Recovery from USB

Description ampnode4 device recovery from USB provided by nnounce support team. Insert the USB drive into the USB-C port on the rear panel. Power off and then power on the device by disconnecting and reconnecting the power connec...

Updated on : 24 May 2024

Firmware update

Description Firmware update of your ampnode4 device is available in the Maintenance section. The installation file is provided by the nnounce support team.

Updated on : 24 May 2024

Installation

2 Articles in this category

About ampnode4

Technical Specifications Contact

Updated on : 24 May 2024