Release 1.4 - November 2024
- 14 Nov 2024
- 2 Minutes to read
- Print
- PDF
Release 1.4 - November 2024
- Updated on 14 Nov 2024
- 2 Minutes to read
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Overview of features deriving from the firmware upgrade from version 1.3 to version 1.4
Main features:
Dashboards for individual devices
Ambient noise
Audio player with MPD player integration
Ducker component
More features:
Device identification on Dashboard
Autologout after specified time from micnode2 series devices
Autologin of user on micnode2 series devices
Static audio files are cached
File synchronization between Raptor system and nnounce devices
Local DNS records management
Export and import of device configuration
LED test on devices
New DSP designer components:
RMS,
Limiter
Filters
Main features:
Dashboard
Each nnounce device has its overview page where the main device information is available on one view.
.png "image(155).png")
.png "image(155).png")
Identify device button shows on micnode2 series devices display message and on other devices LEDs start to blink.
Ambient noise
This new component in DSP Designer enables the integration of an ambient noise device into your audio flow configuration.
Further new components are Limiter and RMS.
.png "image(159).png")
.png "image(159).png")
Audio player
The new Audio player component in DSP Designer now allows to play audio files from the device.
.png "image(157).png")
Playlists can be prepared with the MPD player which can be used with the new Audio player component. Audio files are scanned from the device’s files library and the playlist can be created in the MPD player.
Find out more about MPD player integration on MPD configuration
.png "image(157).png")
Ducker
The Ducker component is used to automatically lower the volume of one or more audio channels when a "priority" channel's signal exceeds a defined threshold.
.png "image(96).png")
More features:
Dashboard - Identify device | Detect the physical location of the device with the Identify button, which triggers the device's LEDs to start blinking. | |
Autologout from micnode2 series devices | Enables to set time in seconds after which the user is logged out due to inactivity. | |
Autologin on micnode2 series devices | Defines credentials for autologin to the device and delay in seconds to change the credentials. | |
Static audio files are cached | Audio files without variables are cached in the device to decrease data load. | n/a |
File synchronization between Raptor system and nnounce devices | Audio player and playlist features require a smooth file synchronization between the Raptor and nnounce ecosystem. | n/a |
Device configuration import/export | Save the configuration of your device and import it on a different device in the Maintenance section. | |
DNS host configuration | New tab where DNS hosts can be configured. | |
LED test on devices | Enables to verify that the device LED indicators are working correctly. | |
Audio stream refresh | Enabling of streams refresh which resets misses and errors. | |
Built-in dashboard micnode 2 series - Clear all zones button | New button enabling to unselect and select all zones in the built-in dashboard used in micnode 2 series devices. |
Release notes 1.4:
Was this article helpful?