Connect the Device

NOTE: Use the LAN B port for a secondary connection if required.

1. Connect the device to power – use a power connector IEC C14 100-240 VAC @ 50-60 Hz.
2. Connect the device to the network, with a DHCP enabled data communication cable CAT5 with a RJ45 connector.
3. Use a computer with an Internet browser and search for your ampnode4 device by typing into the computer the URL https://ampnode4- and the last 6 digits of the MAC address of your device, which you can find on the product sticker of your device.
   • Example: https://ampnode4-250000 or https://ampnode4-250000.local  
   • IMPORTANT: Instead of 250000, enter the last 6 digits of the MAC address found on your ampnode4 device.
   • NOTE: Device is using mDNS. 
4. Your webbrowser shows the login page of your ampnode4 device.
5. Enter credentials into the nnounce configuration user interface:IMPORTANT: Default credentials are admin/simpleway. Change default password upon the first login. 

Now you are able to access the configuration settings of the device and continue with interface configuration, see next tutorial on Interface settings.