Monitoring
- 29 Apr 2025
- 1 Minute to read
- Print
- PDF
Monitoring
- Updated on 29 Apr 2025
- 1 Minute to read
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback!
The Monitoring section groups three monitoring options:
Description
SNMP is used for monitoring of our devices by third party software such as solar winds.
.png)
Click on the Edit button.
Insert your third party software information and credetials.
.png)
.png)
Confirm with the Save changes button.
Tip!
Do not forget to enable your configuration in the field Access.
Description
Connect nnounce devices to your monitoring infrastructure with the telegraf agent.
The logs appear just below the configuration field.
You can also specify where telemetry data about the device should be sent to.
.png)
Add your Configuration.
Activate the logs with the toggle above.
Confirm with the Save changes button.
The monitoring results will appear in the Logs field.
Tip!
Make sure your configuration is active to see the logs.
Description
Connect nnounce devices to your monitoring infrastructure with the vector IO agent.
The logs appear just below the configuration field.
You can also specify where telemetry data about the device should be sent to.
.png)
Add your Configuration.
Activate the logs with the toggle above.
Confirm with the Save changes button.
The monitoring results will appear in the Logs field.
Tip!
Make sure your configuration is active to see the logs.
Was this article helpful?