Device Location

Description

The microphone station can be wall-mounted or placed on horizontal surface by using an desktop stand.

Wall-mount the device

For wall-mounting of the micnode mini device prepare the respective place on the wall and the necessary cabling.

Important

The cutout on the wall should not be larger than 82 x 72 mm.

The screws for mounting the microphone station are not included in the packaging. Use screws that are appropriate for the surface that the device will be mounted to.

1. Prepare the cutout and cables for the device.

2. Remove the two long screws on your device from the docking plate.

3. Use four screws to attach the mounting bracket to the wall and then put the LAN cable through the mounting bracket opening.

4. Attach the device with the two screws from the docking plate to the mounting bracket.

Desk-stand

The micnode mini3 microphone station base attaches to the device with two screws. Before attaching the device to the stand, connect all paging station cables on the rear panel, and put the cables through the stand.