Microphone Station Configuration

Description Connect the microphone on the rear panel of the micnode aux device to the microphone port. Rear panel with connected microphone cable:   Remove the two screws holding the clamp for cable fixing on the rear panel. Conne...

Description Connect your micnode aux extension unit to the primary micnode2 microphone station. The CAT5 cable connects the two units and provides power from the micnode2 microphone station to the micnode aux extension device. Configuration of the...

Description  To make your micnode aux device operable, configure the aux microphone station in the Q-SYS designer by adding it in the micnode2 device plugin. IMPORTANT The micnode aux device uses the same Q-SYS plugin as the micnode2 micr...

Description In your Q-SYS designer find the micnode 2 microphone station plugin which is the main device for your micnode aux extension unit. IMPORTANT The micnode2 device needs to be connected and your micnode aux extension device is connecte...

Description Once the network settings and configuration including zones are set in Q-SYS designer, Live paging can be triggered with the PTT button. IMPORTANT Which mode is used depends on Paging configuration of your micnode2 device in Q-S...