General Information

The micnode aux microphone station is an expansion unit for micnode2 microphone station. The device has three zone selection buttons and status LED including a built-in high – quality preamplifier. It is connected to the micnode2 microphone station using a single CAT5 cable which carries audio, data and power. 

The micnode aux device needs always to be connected to a main micnode2 microphone station. Therefore, this manual assumes that your micnode2 device is configured. This manual describes how to add a micnode aux device to your micnode2 microphone station which is part of an audio configuration. 

Conventions used in this manual:

• WARNING: Information marked ‘Warning’ alerts the user to potential situations that could cause personal injury or death.
• CAUTION: Alerts the user to possible damage to equipment or property. By not following the instructions, the damage caused to the equipment may not be covered under warranty.
• IMPORTANT! indicates instructions or information that are vital to the successful completion of the procedure.
• NOTE is used to indicate additional useful information.

The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual.

• Read these instructions. 
• Keep these instructions. 
• Heed all warnings. 
• Follow all instructions. 
• Do not use this apparatus near water. 
• Clean only with a dry cloth. 
• Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 
• If your unit uses an auxiliary power supply, do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 
• Only use attachments/accessories specified by the manufacturer. 
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 
• Adhere to all applicable, local codes. 
• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.  

The product is not intended to be installed as a system for providing emergency voice communication or to be installed in areas specified by ANSI/ NFPA 72, "National Fire Alarm Code."  

Unpacking

1. micnode aux microphone station 
2. handheld microphone 
3. wall-mounting station holder