Contents x
    Configure FlexUI
    • 22 Jun 2023
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Configure FlexUI

    • Updated on 22 Jun 2023
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    The UI configurations tab allows you to create and modify UI client configs, connect them to the actual devices and monitor their status in the system. In this tutorial, we will create a FlexUI configuration and connect it to the client. FlexUI is a platform that allows users to activate voice announcements, hence, appropriate zones and user access to them should already be pre-configured by your administrator. Please review the Zoning of your PA and display devices to help you prepare the zones for FlexUI and assign them to users. 

    Note: Either adjust to your needs the prepared flex-demo configuration or create a new configuration.

    Topics covered:
    • FlexUI - UI configuration tab

    TUTORIAL STEPS:

    A) Create a new UI configuration

    1. Open the UI configurations tab.
    2. Click the New UI configuration button.

    B) Setup your FlexUI configuration

    1. Name your UI configuration with a unique name.
    2. Set the Client domain type to flex.
    3. Enter the Client ID. Your Client access URL will consist of Client domain type and Client ID. 
    4. Set the UI property to flex.
    5. Drag & drop the desired zones from the Available zones & zone groups section to the Selected zones & zone groups section.
    6. Click the Save button.
    C) UI configuration status

    You can check the status of your UI configuration in the Status column:
    • A green icon indicates that the specific UI configuration has been assigned to the connected client/device - it is connected and successfully signed in. 
    • A red icon indicates that the specific UI configuration is not assigned to any connected client/device - it is disconnected.
    • A "wrench" icon is displayed if the client/device is not configured - it is connected but has no UI configuration assigned to it.


    D) Assigning FlexUI configuration to the client.

    Your FlexUI URL will consist of your instance access URL plus two new sections at the end delimited by "/". The first section is the Client domain type and the second section is the Client ID. Example: https://your instance access URL/flex/demo

    • Type the FlexUI URL
    • Tap on the Save button.
    • Tap on the Switch to UI button.

    Note: If there is no paging station near you, you can use the FlexUI URL in your web browser as an alternative.



    Was this article helpful?
    What's Next