Contents x
    Create a VIDEO WALL
    • 20 Jun 2023
    • 2 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Create a VIDEO WALL

    • Updated on 20 Jun 2023
    • 2 Minutes to read
    • Print
    • Dark
      Light
    • PDF
    Article Summary

    In this tutorial, we will create a video wall configuration that uses several separate displays, assuming you already have displays connected and configured. If you need a refresher on this topic, see tutorial: Connect and configure DISPLAYS. 

    Similar to display banks, video walls are composed of two or more displays and the wall layout can be designed according to the physical installation of your displays by setting up its dimensions - the number of displays horizontally and vertically. The assigned template is stretched over the whole dimension of the video wall. 

    Note: The configuration of the video wall always overrides the configurations of the individual displays included in that video wall. Unlike display banks, video walls do not have a content fallback function. 

    You can use Asset values in the video wall in the same way you would when configuring individual displays, allowing you to assign specific attributes to the displays for data-driven content rendering.  You can create your own airport-specific asset values in the Asset section, such as Carriers, Gates, etc., as well as custom values in the Custom Fields tab, and then use them in the video wall configuration window as you wish.

    Topics covered
    • Displays tab - Video wall

    TUTORIAL STEPS:

    A) Create a new video wall
    1. Open the Displays tab.
    2. Click the New video wall button.
    B) New video wall configuration window

    1. Name your video wall.
    2. Click the Add display button.
    C) Display configurations sub-window

    1. Select display configurations to be included in your video wall by checking the appropriate checkboxes.
    2. Click the Choose button.

    D) Assign content to you display wall


    E) New video wall configuration window 

    1. Set the dimensions of the video wall according to the physical installation of the displays, that is, according to the number of displays arranged horizontally and vertically.
    2. Use the drop-down list to select the display configuration for each cell of the video wall table, which is generated based on the dimensions set in the previous step.
    3. Set the asset & custom field value if required.
    4. Click the Save button to finalize your configuration. The connected displays are now ready to show the configured template. 
    Important notes:
    • Content of the video wall always overrides the content of the individual displays which are added to the video wall after saving the configuration.
    • No restriction for the content resolution is applied when assigning any template, content is always stretched over the whole video wall. Aspect ratio according to the video wall resolution (sum of individual added display resolutions) and template resolution is fixed and black stripes added on the sides of the video wall in case when the content's aspect ratio is different.


    Was this article helpful?
    What's Next