Audio configuration

Before you can hear voice announcements across your campus or premises/facilities, you need to connect the   PA system  to the audio configuration in your Simpleway C loud  instance .  Simpleway CX system c...

Start your nnounce cloud voice configuration by connecting your ionode4 device to the network, how to do this is described in the ionode4 - Connect the device tutorial under " Hardware" . You will then be able to link the ionode4 device w...

In this tutorial we will show you how you can create or configure an: ionode4 DSP  design ,  TX and RX streams ,  time zone and  reboot  the device  directly from Simpleway Cloud CX ....

The Zones  tab enables you to assign display configurations and/or audio device outputs to zones, while the Zone groups tab allows you to group zones as well as other zone groups. There is no restriction to how many times each zone or zon...

In this tutorial we will show you how to u pdate the firmware of nnounce devices from  your Simpleway Cloud CX instance , which allows you to update individual devices as well as many devices of the same type at once. You can also update t...

In this tutorial, we will explain further nnounce devices features which you can manage from your CX installation. We guide you through the process of: adding new scripts  to your devices,  backing up your devices, and ...