Option: Rack mounting

1. Single

Two brackets are used to mount a single ampnode4 unit:

A. Remove the two front screws from the side of the device.
B. Place the bracket as on the picture (use the smaller holes). Use the same screws and attach the bracket to the device.
C. Repeat the steps above also for the other device side.
D. Your device is ready to be mounted in your rack.

2. Pair 

For two devices next to each other in the rack, place them in pairs. You will need two brackets and a connection plate with 4 screws.

A. Remove two front screws and the middle screw on the device side.
B. Repeat step A also for the second ampnode4 device just on the other device side.
C. Place the bracket on the device side as on the picture. Use the same screws and attach the bracket to the device. Repeat this step also for the second device.
D. Turn the devices upside up and place them next to each other as in the picture.
E. Attach the two devices together with the connection plate using 4 screws.
F. Your devices are ready to be mounted in your rack.