Contents x
    Network Streams
    • 24 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Network Streams

    • Updated on 24 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    Description

    Configure your TX and RX streams.

    • TX stream – transmits audio to other devices, output.
    • RX stream – receives audio from other devices, input.

    One stream can have 1 – 8 channels.

    IMPORTANT: To fully configure network streams, network inputs and/or network outputs must be included in the DSP design, and the DSP design itself must be saved and deployed.

    A. Navigate to the Network stream section in the left menu. 

    Click on the plus icon for the TX stream.










    B. Insert the following information about the stream:

    • Protocol – select AES67
    • Number of channels using the plus/minus buttons
    • IP port of a receiver (e.g. Q-Sys core)
    • Individual channels can be assigned to “Net Tx” from the DSP design. 

     

    Click on the Add new stream button.





    C. Confirm the configuration with the Save all changes button.

    Was this article helpful?
    What's Next