Contents x
    Interface Settings
    • 29 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Interface Settings

    • Updated on 29 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    Description

    After login into the nnounce configuration UI, establish a connection between your new ionode4 device and your network. Configure the LAN A and LAN B ports in the Interfaces section.

    Choose between manual and auto mode setting:

    • Manual  - user enters IP Address, Net Mask and default Gateway.
    • Auto  - a DHCP server is required to automatically obtain network settings.
    • Off mode turns off the port

    IMPORTANT: You will need the device's IP address, MAC address from your device, see Connect the device.

    Note: Navigate backwards or cancel your steps with the Back function in your browser. 


    A. Navigate to the Interfaces section in the left menu.
    You can preconfigure two LANs A and B, see rear panel ports.










    B. Configure the interface in the Manual mode or Auto mode (DHCP).


    1. Manual mode

    C. Fill in the fields:
      • IP Address
      • Net Mask
      • Other fields are optional.
      • Static routes for remote networks that need to be reached via the LAN adapter.
      • DNS server and Search domains are assigned by the DHCP server.


    D. Advanced slider enables to insert advance configuration. 
    • CIDR notation. 

    Click on the Save changes button to confirm the configuration.


    2. Auto mode

    E. Automatically obtain from DHCP server:
    • IP address
    • Net Mask
    • Gateway
    • Static routes for remote networks that need to be reached via the LAN adater (for advanced use).
    • DNS server and Search domains are assigned by the DHCP server.
    Click on the Save changes button to confirm the configuration.

    IMPORTANT: The OFF  option disables the port.

    Was this article helpful?
    What's Next