Contents x
    Interface Settings
    • 28 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Contents

    Interface Settings

    • Updated on 28 May 2024
    • 1 Minute to read
    • Print
    • Dark
      Light
    • PDF
    Article summary

    Description
    After login into the nnounce configuration UI, establish a connection between your new micnode2 station and your network. Configure the LAN A and LAN B ports in the Interfaces section.

    Choose between manual and auto mode setting:

    • Manual - user enters IP Address, Net Mask and default Gateway.
    • Auto - DHCP server needs to be available to obtain network settings automatically.
    • Off mode turns the port off.
    IMPORTANT: You will need the device's IP address, MAC address from your device which you find on the rear panel.

    Note: Navigate backwards or cancel your steps with the Back function in your browser.


    A. Navigate to the left-hand menu to the Interfaces section.
    You can preconfigure two LANs A and B, see rear panel ports.











    B. Configure the interface in the Manual mode or Auto mode (DHCP).


    1. Manual mode

    C. Fill in the fields:
      • IP Address
      • Net Mask
      • Other fields are optional.
      • Static routes for remote networks that need to be reached via the LAN adapter.
      • DNS server and Search domains are assigned by the DHCP server.
        Click on Save changes button to confirm your configuration.




    2. Auto mode

    D. Automatically obtain from DHCP server:
    • IP address
    • Net Mask
    • Gateway
    • Static routes for remote networks that need to be reached via the LAN adater.
    • DNS server and Search domains are assigned by the DHCP server.

    Click on the Save changes button to confirm the configuration.

    IMPORTANT: The option OFF disables the port.


    Was this article helpful?
    What's Next