General Information
  • 28 Jun 2024
  • 3 Minutes to read
  • Dark
  • PDF

General Information

  • Dark
  • PDF

Article summary

micnode mini microphone station is an easy to use three-zone paging station. It is delivered with a handheld microphone. The device is wall-mounted or can optionally be placed on a desk using the stand accessory. It is built on top of the nnounce secure and scalable audio platform. 

The device is an easily integrable network device that can communicate over the network using all contemporary audio standards such as AES67 or RTP. It connects to the nnounce platform and Q- SYS audio system over LAN networks

Voice input is provided through a handheld dynamic push-to-talk (PTT) microphone for being played in configured zones. Configuration of the Q-SYS audio system is possible using the Q- SYS designer.  

Conventions used in this manual:

  • WARNING: Information marked ‘Warning’ alerts the user to potential situations that could cause personal injury or death.
  • CAUTION: Alerts the user to possible damage to equipment or property. By not following the instructions, the damage caused to the equipment may not be covered under warranty.
  • IMPORTANT! indicates instructions or information that are vital to the successful completion of the procedure.
  • NOTE is used to indicate additional useful information.

High voltageThe intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual.

High voltage WARNING High voltage

  1. To prevent the risk of electric shock, only qualified personnel should remove the cover.
  2. Before servicing, disconnect the power supply.
  3. Don’t expose the device or its equipment to water, rain, or any other liquids or liquid cleaners, as it may cause fire or electric shock. 
  4. Use only one power supply to the microphone station at a time.


  1. Operating temperature of the device - range 32°F – 122°F (0°C–50°C), storage temperature - range 14°F to 140°F (-10°C–60°C). 
  2. Power should only be supplied over Ethernet (PoE) IEEE 802.3af.
  3. Relative humidity range during storage: 10% to 85% humidity (non-condensing).

    • Read these instructions. 
    • Keep these instructions. 
    • Heed all warnings. 
    • Follow all instructions. 
    • Do not use this apparatus near water. 
    • Clean only with a dry cloth. 
    • Do not block any ventilation opening. Install in accordance with the manufacturer's instructions and all federal, state, and local municipal codes. 
    • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 
    • If your unit uses an auxiliary power supply, do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
    • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 
    • Only use attachments/accessories specified by the manufacturer. 
    • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 
    • Adhere to all applicable, local codes. 
    • Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.  

The product is not intended to be installed as a system for providing emergency voice communication or to be installed in areas specified by ANSI/ NFPA 72, "National Fire Alarm Code."  

The device has been tested for compliance:

  • ICES-003:2020-10
  • EN 55032:2015 / DIN EN 55032:2015/A11:2021 Electromagnetic compatibility of multimedia equipment – Emission Requirements / (CISPR 32:2015/AMD1:2019)
  • ENT 55035:2017 / DIN EN 55035:2017/A11:2022 Electromagnetic compatibility of multimedia equipment – Immunity requirements / (CISPR 35:2016)

FCC Statement 

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

RoHS Statement

Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS).


  1. micnode mini microphone station 
  2. handheld microphone 
  3. wall-mounting station holder


Optional accessories

  • Desktop stand

Was this article helpful?

What's Next