micnode2 - Microphone Station

micnode2 microphone station is a paging station with a built-in 8-inch touch screen and customizable user interface for advanced applications. It is delivered with a handheld microphone. The device is wall-mounted or can optionally be placed on a ...

Description Front and rear panel of the micnode2 microphone station.

Description In the previous chapter you connected your micnode2 microphone station to the network via a standard ethernet cable. To add your new device tothe Q-SYS audio network, it should consist of: Q-SYS Core and further Q-SYS peripherals...

Description Create an AES67 stream in the Q-SYS designer. Select first the component and then configure it in the micnode2 plugin. Add the stream component to your Q-SYS design: Set up stream properties : IMPORTANT : Streams need to h...

Description Micnode2 device recovery from USB provided by nnounce support team. Note : Not all USB flash discs versions are compatible, use version 3.1. Insert USB stick to the USB port on the rear panel. Power on/off of the device by u...

Description Firmware update of your micnode2 device is available in the Maintenance section. The installation file is provided by the nnounce support team. NOTE : The file is typically a .swu file.

Description For wall-mounting of the microphone station, prepare the respective place on the wall and the necessary cabling. The openings for screws on the mounting bracket are at a distance of 950 x 950 mm from each other. IMPORTANT : Th...

Description Replace the microphone on your micnode2 microphone station. The micnode2 device is ready to use with the new microphone.

Technical Specifications Contact