---
title: "Connect Your PA System for Voice Announcements – Airport CX"
slug: "introduction-audio-configuration-air"
description: "Link your PA system to your Simpleway instance — nnounce, QSC Q-SYS, Bosch Praesensa, and Ateis are supported."
updated: 2026-09-02T11:06:48Z
published: 2026-09-02T11:06:48Z
canonical: "docs.simpleway.cloud/introduction-audio-configuration-air"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Introduction to audio configuration

Before you can hear voice announcements across your premises, campus, airport or public transport network, you need to **connect the** PA system **to the audio configuration in your** Simpleway CX **instance**.

> [!TIP]
> Simpleway CX system supports :
> 
> - nnounce platform,
> - QSC Q-SYS,
> - Bosch Praesensa,
> - Ateis and other custom installations. nnounce platform,

Other common PA system providers will be included in the future.

[**nnounce Platform**](http://nnounce.com) **is fully integrated with the Simpleway CX Cloud instance and is the Simpleway inhouse audio solution. Apart from the physical installation, the following configuration is required:**

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1687856149522.png)

Find out more about our nnounce audio platform on our [web](https://www.nnounce.com/) or in the [Hardware section below](/v1/docs/hardware-guide).

### **Infrastructure setup of the audio configuration:**

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1687264707394.png)

### **QSC Core installations**

QSC Core is compatible with the Simpleway CX Cloud instance installation. You need to install the QSC Core and configure it in QSC Designer. Then establish a secure connection with the Simpleway management bridge. After that, you can configure your cloud instance and connect it to the QSC Core.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1655457138381.png)

To configure the paging stations, please follow the paging station user manual supplied with the devices or below in the Hardware section.