--- title: "Stream Configuration" slug: "stream-configuration-mini" updated: 2025-11-21T11:24:10Z published: 2025-11-21T11:24:10Z canonical: "docs.simpleway.cloud/stream-configuration-mini" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Stream Configuration DescriptionCreate an AES67 stream in the Q-SYS Designer. Select the component first and then configure it in the micnode mini plugin. --- 1. Add the stream component to your Q-SYS Design: ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1704967275741.png) 2. Set up the **stream properties**:![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1718280949606.png)**IMPORTANT**: Streams must have *Script access* set to the value *Script*. 3. Configure the ***Streams Configuration* section in micnode mini plugin**. Depending on the **Configuration Mode** - **Basic, Advanced** or **Manual** - selected in the mic station *Properties*, values are either prefilled or set manually. *Basic* mode has a default design and preset ports, in the *Advanced* mode you create your own design and set manually your stream configuration. The config in the Q-SYS plugin is synchronized to the nnounce config UI. The Q-SYS plugin is the data owner. Whereas the *Manual* mode defines as the data owner the nnounce config UI. **IMPORTANT**: Before configuring streams in the plugin's Streams Configuration section, select *Save to Core & Run* in your design. ## **Option: Basic Mode** 1. Define the multicast address. In the Basic mode, the *Pattern* must always be a multicast address, with the last number matching the *Unit ID* of your micnode mini6. **NOTE**: This field is prefilled but editable, changes reflect in the stream IP address fields. 2. Select your streams from the dropdown. **IMPORTANT**: The stream name must include **TX** for transmitter streams. 3. Set the *Interface* for your stream. *Activate or deactivate* a stream by clicking the pink rectangle. 4. Confirm your configuration with the *Submit* button. **NOTE**: The field below the Submit button shows the progress. ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1763464856058.png) **The nnounce configuration UI** takes over the information from Q-SYS. In the Basic mode the default design is used in the DSP designer. Manual changes by the user are overwritten with the default design after reconnecting to the WebSocket. The *Network Streams* section shows the streams as configured in the Q-SYS designer. IMPORTANT: Do not modify *Audio streams* in the nnounce configuration UI to avoid malfunction.  ## **Option: Advanced Mode** The Advanced mode lets you set up manually your micnode mini device’s protocols, IP addresses, ports etc. for your streams. 1. Open the *Streams Configuration* section of your micnode mini plugin. **IMPORTANT**: No values are auto-filled in. ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1763464991113.png) 2. Map your stream/s: 1. *Protocol* – stream protocol, 2. *IP address* – enter the address depending on whether the stream is multicast or unicast, 3. *Port* – stream port number, 4. *Channel* – define the particular channel of the stream, 5. *Ch. Count* – sets the total number of channels of the stream. 6. *Interface* – define which LAN of the device is used, 7. *Active* – activate or deactivate individual streams by simple click on the rectangle. **IMPORTANT**: micnode mini stream configuration needs to correspond to receiver and/or transmitter configuration in your Q-SYS Designer. 3. Confirm your configuration with the *Submit* button. **NOTE**: The field below the Submit button will show the progress and validation messages in case of any connection errors. **The nnounce configuration UI** reflects the stream configuration in the Audio Streams section, showing the streams as defined in Q-SYS Designer. *Example of Audio Streams configuration in nnounce configuration UI:* ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1763465125045.png) ## **Option: Manual Mode** With the Manual mode audio stream configuration, changes are performed in nnounce configuration UI and the Q-SYS plugin is synchronizing the information. The stream configuration information is read-only in the Q-SYS plugin in this mode. ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1763545838428.png)