---
title: "Configure AES67 TX and RX Streams for micnode2 – nnounce"
slug: "stream-configuration-micnode2"
description: "Add the stream component in Q-SYS Designer, then map TX and RX streams in the micnode2 plugin."
updated: 2026-09-18T07:59:27Z
published: 2026-09-18T07:59:27Z
canonical: "docs.simpleway.cloud/stream-configuration-micnode2"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Stream Configuration

Description

Create an AES67 stream in the Q-SYS Designer. Select first the component and then configure it in the micnode2 plugin.

---

1. Add the stream component to your Q-SYS Design:

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-URO449BN.png)
2. Set up **stream properties**:

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-RK5D06T9.png)

**IMPORTANT**: Streams need to have *Script access* set to the value *Script*. In older Q-SYS Designer versions Script access is not visible in Stream properties. Rename the stream in a disconnected design. Only after that the stream is visible in the micnode2 plugin.
3. Once the Stream component is set up, switch to the **micnode2 plugin** and configure the ***Streams Configuration* section**.

Based on the chosen Configuration ***Mode* Basic or Advanced** in mic station *Properties*, the values are either prefilled in or you can set up the values manually.

*Basic* mode has a default design and preset ports, in the *Advanced* mode you create your own design and set manually your stream configuration.

**Option: Basic Mode**

1. The multicast address is filled in automatically. In the Basic mode the *Pattern* is the IPv4 first and second byte and the last number is your micnode2 *Unit ID.*

**IMPORTANT**: Unit ID is a number you have assigned to your device in the *Properties* section. It is important to assign a unique number, we recommend ascending numbering of your microphone stations.

**NOTE**: This field is editable but prefilled, changes are visible in the stream IP address fields.

2. Select your streams from the dropdown.

**IMPORTANT**: The stream name needs to include TX for transmitter streams and RX for receiver streams.

3. Set the *Interface* of your stream.

4. Confirm your configuration with the *Submit* button.

**NOTE**: The field below the *Submit* button will show the progress.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-JQHSNKEL.png)

**The nnounce configuration UI** takes over the information from Q-SYS. In the Basic mode the default design is used in the DSP Designer. Manual changes by the user are overwritten with the default design after reconnecting to the WebSocket. The *Network Streams* section shows the streams as configured in the Q-SYS Designer.

IMPORTANT: Do not make any changes in the nnounce configuration UI - DSP Designer and Network stream - to avoid malfunction.

*Default DSP design:*

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-OR72L2IF.png)

### **Option: Advanced Mode**

The Advanced mode lets you set up manually your micnode2 device’s protocols, IP addresses, ports etc. for your streams.

1. Open the *Streams Configuration* section of your micnode2 plugin.

**IMPORTANT**: No values are auto filled in.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-NPR2K5YX.png)

2. Map your stream/s:

1. *Protocol* – stream protocol,
2. *IP address* – fill in the address depending on multicast or unicast stream,
3. *Port* – stream port number,
4. *Channel* – define the particular channel of the stream,
5. *Ch. Count* – sets the total number of channels of the stream.
6. *Interface* – define which LAN of the device is used,
7. *Active* – activate or deactivate individual streams by simple click on the rectangle.

**IMPORTANT**: micnode2 stream configuration needs to correspond to receiver and/or transmitter configuration in your Q-SYS Designer.

3. Confirm your configuration with the *Submit* button.

**NOTE**: The field below the Submit button will show the progress and validation messages in case of any connection errors.

The **DSP Designer** in the **nnounce configuration UI** takes over the design from Q-SYS only unless no custom design is created by the user. The *Network Streams* section shows the streams as configured in the Q-SYS Designer.

- *TX stream* – transmits audio to other devices, output.
- *RX stream* – receives audio from other devices, input.

**IMPORTANT**: Do not make any changes in the nnounce configuration UI - DSP Designer and Network stream - to avoid malfunction.

*Example of network stream configuration in nnounce configuration UI:*

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-F0WCIM5E.png)