--- title: "SNMP, Telegraf and Vector Monitoring Agents – nnounce" slug: "monitoring" description: "Monitor devices with SNMP for tools like SolarWinds, or send telemetry via Telegraf or Vector." updated: 2025-10-06T07:47:02Z published: 2025-10-06T07:47:02Z canonical: "docs.simpleway.cloud/monitoring" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Monitoring The Monitoring section groups three monitoring options: SNMPTelegraf AgentVector IO Agent > **Description** > > SNMP is used for monitoring of our devices by third party software such as solar winds. --- ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(215).png) 1. Click on the ***Edit*** button. 2. Insert your third party software information and credetials. ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(216).png) Confirm with the *Save changes* button. > [!NOTE] > Tip! > > Do not forget to enable your configuration in the field Access. ## > **Description** > > Connect nnounce devices to your monitoring infrastructure with the telegraf agent. > > The logs appear just below the configuration field. > > You can also specify where telemetry data about the device should be sent to. --- ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(214).png) 1. Add your ***Configuration***. 2. Activate the logs with the toggle above. 3. Confirm with the *Save changes* button. The monitoring results will appear in the ***Logs*** field. > [!NOTE] > Tip! > > Make sure your configuration is active to see the logs. > **Description** > > Connect nnounce devices to your monitoring infrastructure with the vector IO agent. > > The logs appear just below the configuration field. > > You can also specify where telemetry data about the device should be sent to. --- ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(213).png) 1. Add your ***Configuration***. 2. Activate the logs with the toggle above. 3. Confirm with the *Save changes* button. The monitoring results will appear in the ***Logs*** field. > [!NOTE] > Tip! > > Make sure your configuration is active to see the logs.