---
title: "Replace the Handheld Microphone on a micnode2h – nnounce"
slug: "microphone-replacement-micnode2"
description: "Remove the docking plate, unplug the old mic, fit the strain relief to the new cable, then reassemble."
updated: 2026-09-18T07:48:54Z
published: 2026-09-18T07:48:54Z
canonical: "docs.simpleway.cloud/microphone-replacement-micnode2"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Microphone Replacement

DescriptionReplace the microphone on your micnode2h microphone station.

| A. **Remove** **the 4 screws** **from the magnetic docking plate** from the device. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0495a.jpg) |
| --- | --- |
| B. **Open the chassis** by moving the microphone cable with light side-to-side movements and remove the docking plate. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0502.jpg) |
| C. **Unplug the connected microphone** by pressing the beak on the top of the connector and pulling it out of the socket. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1698228832903.png) |
| D. **Remove the cable from the docking plate** by pulling the cable out with light force. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0516a.jpg) |
| E. **Connect the NEW microphone** by plugging the microphone connector into the Ethernet port. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0539a.jpg) |
| F. Remove the **cable strain relief** from the old microphone cable and place it on the cable of the new microphone. - Secure the cable strain relief around the cable. - Gently bend the cable so that it is not kinked and pull it through the hole at the bottom and out of the device. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0543.jpg) |
| G. **Put the docking plate back in place**. - Push the **cable strain relief** into the hole with the cable pointing downwards and secure it by pushing the palm of your hand from the top towards the device until the cable strain relief clicks into place. - Reattach the **4 screws** on the device. | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/_DSC0561a.jpg) |

**The micnode2 device is ready to use with the new microphone.**