--- title: "micnode aux Expansion Unit Product Overview – nnounce" slug: "general-information-aux" description: "A three-zone expansion unit for micnode2h and 2g, connected and powered by a single CAT5 cable." updated: 2025-05-15T12:59:33Z published: 2025-05-15T12:59:33Z canonical: "docs.simpleway.cloud/general-information-aux" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # General Information The micnode aux microphone station is an **e****xpansion unit for micnode2h and 2g microphone stations**. The device has three zone selection buttons and status LED including a built-in high – quality preamplifier. It is connected to the micnode2 microphone station using a single CAT5 cable which carries audio, data and power. The micnode aux device needs always to be connected to a main micnode2 microphone station. Therefore, this manual assumes that your micnode2 device is configured. This manual describes how to add a micnode aux device to your micnode2 microphone station which is part of an audio configuration. ## Conventions used in this manual: - **WARNING**: Information marked ‘Warning’ alerts the user to potential situations that could cause personal injury or death. - **CAUTION**: Alerts the user to possible damage to equipment or property. By not following the instructions, the damage caused to the equipment may not be covered under warranty. - **IMPORTANT**! indicates instructions or information that are vital to the successful completion of the procedure. - **NOTE** is used to indicate additional useful information. ![High voltage](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1696330232755.png)The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans. ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1696331404579.png)The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and maintenance instructions in this manual. | ![High voltage](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1661166536508.png) WARNING ![High voltage](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1661167773299.png) 1. To prevent the risk of electric shock, only qualified personnel should remove the cover. 2. Before servicing, disconnect the power supply. 3. Don’t expose the device or its equipment to water, rain, or any other liquids or liquid cleaners, as it may cause fire or electric shock. | | --- | | ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1696331404579.png)IMPORTANT SAFETY INSTRUCTIONS![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1696331404579.png) 1. Operating temperature of the device - range 32°F – 122°F (0°C–50°C), storage temperature - range 14°F to 140°F (-10°C–60°C). 2. Power sourced 12V from micnode2 microphone station. 3. Relative humidity range during storage: 10% to 85% humidity (non-condensing). | | --- | The product is not intended to be installed as a system for providing emergency voice communication or to be installed in areas specified by ANSI/ NFPA 72, "National Fire Alarm Code." The device is an accessory of the micnode2h and micnode2g microphone stations and cannot be used as a stand-alone unit.  ## Unpacking 1. micnode aux microphone station 2. handheld microphone 3. wall-mounting station holder