--- title: "Connect a micnode aux to a micnode2 Station – nnounce" slug: "connect-the-device-aux" description: "Run a CAT5 cable from the MASTER port on the aux to the MIC port on the micnode2, then reboot." updated: 2025-06-17T10:19:50Z published: 2025-06-17T10:19:50Z canonical: "docs.simpleway.cloud/connect-the-device-aux" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Connect the Device DescriptionConnect your micnode aux extension unit to the primary micnode2h or 2g microphone station. The CAT5 cable connects the two units and provides power from the micnode2 microphone station to the micnode aux extension device. Configuration of the micnode aux is dependent on the micnode2 configuration.IMPORTANTConnect the two devices by using a CAT5 cable. The cable is not part of the package. --- *micnode2 microphone station and micnode aux rear panel:* *![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1704891553689.png)* Connect your micnode aux device with your micnode2 microphone station by using a CAT5 cable. 1. Use the port marked as MASTER on the rear panel of your micnode aux device. 2. Connect the other side of the cable to the micnode2 device to the port marked as MIC. **CAUTION**: The micnode aux device uses power over a single CAT5 cable from the micnode2 device. IMPORTANTAfter connecting your micnode aux device, please restart the respective micnode2 microphone station to assure proper boot of all services.