--- title: "Assign Zone Buttons and Paging Mode on the aux – nnounce" slug: "configure-device-in-plugin-aux" description: "Map zones to the three buttons, then set paging mode, priority, station number and max page time." updated: 2025-05-15T13:01:44Z published: 2025-05-15T13:01:44Z canonical: "docs.simpleway.cloud/configure-device-in-plugin-aux" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Configure Device in Plugin DescriptionIn your Q-SYS designer find the micnode 2 microphone station plugin which is the main device for your micnode aux extension unit.IMPORTANTThe micnode2 device needs to be connected and your micnode aux extension device is connected with a CAT5 cable to this micnode2 station. --- 1. Open the micnode2 plugin in the Q-SYS designer and click on the second section “**AUX Paging station**”. 2. Configure the *zone selection buttons* by assigning the required zone to the button. IMPORTANTButtons are numbered from top to bottom on the device.  3. Set up paging properties in the *Paging Config* for your aux device as: - **Mode** – chose the paging mode for using the PTT button – Auto, Live, Delay - **Priority** (default) – sets the default paging priority for the device, - **Station** – number of the device used for stream configuration. - **Max Page Time** – set the maximum announcement length in seconds, select a value from the list. etc. according to your audio configuration. **IMPORTANT**: RED fields are mandatory and need to be defined for complete configuration ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1742551389466.png) Your aux paging station connects and is ready for paging.