---
title: "Set Up AES67 and RTP Streams and Read Stats – nnounce"
slug: "audio-streams"
description: "Create TX and RX streams of 1 to 8 channels, then check status and counters in stream stats."
updated: 2026-08-17T09:07:30Z
published: 2026-08-17T09:07:30Z
canonical: "docs.simpleway.cloud/audio-streams"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Audio Streams & Stats

## Audio Streams Setup

> [!NOTE]
> Description
> 
> Configure your device’s Audio streams by defining the:
> 
> - *TX stream* – transmits audio to other devices, output.
> - *RX stream* – receives audio from other devices, input.
> 
> Each stream can support between 1 – 8 channels.

> [!WARNING]
> Important
> 
> - To fully configure network streams, make sure to include network inputs and/or outputs in the DSP design. Once configured, save and deploy the DSP design to apply the changes.
> - Unicast TX stream must be bound to a specific interface - LAN A or LAN B, the option BOTH is not allowed.

---

**Prerequisite**

> [!NOTE]
> Tip!
> 
> Before you start to configure the streams on the *Audio streams* tab, create your input and output channels - Net TX & Net RX - from the Components.
> 
> Drag and drop it onto the canvas and name the channel/s.

*![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-1697799737374.png)*

[Video](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/set%20stream.mp4)

**Create new audio stream**

1. Click on the ***plus+* icon** for the TX stream or in the lower part for RX stream.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(226).png)

1. Insert the following information about the stream:

Confirm with the *Save changes* button.
  1. **Protocol** – select AES67 or RTP
  2. Interface - LAN A or B (if both available for the device)
  3. Number of **channels** with the plus/minus
  4. **IP port** of receiver (e.g. Q-SYS core)
  5. Individual channels can be assigned to “Net Tx” from DSP design.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(147).png)

**An existing stream can be modified with the three dots :**

- Edit,
- Disable
- Delete.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(224).png)

## Audio Streams Stats

> **Description**
> 
> An overview of all configured audio streams with details about their configuration and current status.
> 
> It starts with TX streams and continues with RX streams.

![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image (69).png)

| ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image(114).png) | Use the *Refresh stats* button in the upper right corner of each stream to reset all counters of the respective stream. |
| --- | --- |
| ![](https://cdn.document360.io/a3e67867-6316-451b-94ad-ec727ac9102a/Images/Documentation/image-8MLS6WFR.png) | The *Reset all* button in the upper right corner resets all stream counters at once. |

For each stream you can see the connected LAN, Protocols, IP:Port etc.