--- title: "micnode mini3 LED Paging Status Codes Explained – nnounce" slug: "announcement-triggering-mini3" description: "Yellow means ready, red means busy, green blinking means your live call is in progress." updated: 2026-02-05T11:18:52Z published: 2026-02-05T11:18:52Z canonical: "docs.simpleway.cloud/announcement-triggering-mini3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Announcement Triggering Description Once the network settings and configuration including zones are set in Q-SYS Designer, paging can be triggered with the PTT button. Important Which paging mode is used depends on *Paging configuration* of your micnode mini device in Q-SYS Designer. --- 1. Select on your micnode mini6 device the zone/s for your announcement by pressing the corresponding zone button/s. The selected button/s will light up. 2. Start your announcement by pressing the Talk/Start button on the microphone side. ## Control LED Paging Status | **ACTION** | **STATUS & DESCRIPTION** | | --- | --- | | **Ready to page** | Yellow LED At least one zone button selected and zones are available | | **Busy** | Red LED At least one zone button selected and is busy | | **No Zone selected** | LED off No zone button is selected | | **Starting PTT button – Waiting in Queue** | Yellow LED, fast blinking At least one zone button is selected, PTT button is pressed but at least one zone is occupied by same or higher priority | | **Talk - Ready** | Green LED, slow blinking PTT button pressed and live call is in progress. | | **Stop call** | Green LED, no blinking Let go the PTT button, the call is done. | | **Stopped by higher priority** | Red LED, first 4times blinking and the busy zone Your call was interrupted by an other announcement with higher priority paged in the same zone. |