--- title: "Page from a micnode aux and Read the LEDs – nnounce" slug: "announcement-triggering-aux" description: "Select zones, press Talk, and read the status LED: on means ready, fast blinking means busy." updated: 2026-02-05T11:08:56Z published: 2026-02-05T11:08:56Z canonical: "docs.simpleway.cloud/announcement-triggering-aux" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.simpleway.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Announcement Triggering Description Once the network settings and configuration including zones are set in Q-SYS designer, paging can be triggered with the PTT button. IMPORTANT Which mode is used depends on Paging configuration of your micnode aux device in Q-SYS designer. --- 1. Select on your micnode aux device the *zone/s to which your announcement is to be paged* by clicking on the zone selection button/s. The selected button/s will light up. **Note**: Pressing the button on your aux device is visible also in the Q-SYS plugin as well as the paging process. 2. Start your announcement by pressing the *Talk/Start button* on the microphone side. **NOTE**: Preamble can be set for micnode aux device. While preamble is playing, the status LED on the micnode aux device is blinking. ## **Control LED Paging Status** | **Ready to page** | LED is ON At least one zone button is selected and zones are available | | --- | --- | | **Busy** | LED is blinking fast At least one zone button is selected and one zone at least is occupied | | **No zone selected** | LED is OFF No zone button is selected | | **Talk - READY** | LED is slowly blinking PTT button is pressed and paging is in progress | | **Interrupted call** | LED blinking fast Call override by higher priority | | **Waiting for call to start** | LED blinking fast At least one zone button is selected and at least one zone is occupied by same or higher priority |