Optional: Wall-mounting of paging station
  • 08 Sep 2022
  • 1 Minute to read
  • Dark
    Light
  • PDF

Optional: Wall-mounting of paging station

  • Dark
    Light
  • PDF

Article Summary

For wall-mounting of the paging station, prepare the respective place on the wall and the necessary cabling.

The openings for screws on the mounting bracket are at a distance of 950 x 950 mm from each other.

 

Important: The cutout on the wall should not be larger than 700 x 700 mm.

The screws for mounting the paging station are not included in the packaging. Use screws that are appropriate for the surface that the paging station will be mounted to.

 

  1. Prepare the cutout and cables for the paging station.
  2. Use four screws to attach the mounting bracket to the wall and then put all the cables through the mounting bracket opening. 
  3. Attach the paging station with two screws to the mounting bracket.

Was this article helpful?